Rover HVE Ride-on High Volume Extractor One of the biggest challenges for carpet extractors is removing water from the carpet pad. No matter how much suction is applied, water will only come out if the extraction device effectively compress the pad and create an sufficient seal. Some machines accomplish this with heavy weights. These are a hassle to carry onto the job, and clumsy, requiring the operator to repeatedly move and reset the machine. The weight of the rider on the Rover helps to compress the pad, while the Rovers special polymer glide creates the seal needed to extract as much water as possible. These features, combined with great maneuverability, help to reduce operator fatigue, boost production rates, and produce a deeper, more consistent extraction. Product Features Separate drive wheels allow the Rover HVE to move easily around corners and in tight spots Replaceable polymer glide seals firmly over all carpets to provide deep extraction Joystick is rated for 5 million cycles Collapsible handle for space-saving storage and ease of transport Front loading wheels make the unit easy to transport and store Extraction can be visually monitored through the clear take-up tube Model F354 Weight 67 lbs. | 30 kg Extraction path width 19.75 in. | 50.2 cm Dimensions (H × W × D) 45.7 × 22 × 27.6 in. 116 × 56 × 70 cm Dimensions (folded) (H × W × D) 40.5 × 22 × 10.7 in. 103 × 56 × 27 cm Amp draw 3 amps Speed 2 speed switch Power 110 W/115V Motor One 0.148 HP motor on each wheel Cord length 45 ft. | 13.7 m Glide Replaceable polymer Handle Collapsible Housing Rotomolded polyethylene Frame Stainless steel Motor control Joystick, rated for 5 million cycles Safety ETL tested to UL & CSA standards.